Electrical: | |
Impedance: | 186 Ohms nominal |
Resistance per foot (D.C.): | Less than 180 milli-Ohms for center conductor and less than 4 milli-Ohms for shield |
Total loss for 3m length: | Immeasurable over the 20 Hz to 20 kHz range |
Capacitance per foot: | 8 pico-Farads nominal |
Inductance per foot: | 290 nano-Henrys nominal |
Amplitude and Phase response: | Into an 10 K Ohm load, an 8 foot length of DAL ULC cable exhibits a drop of only 0.5 dB and a phase lag of only 30 degrees at 5 MHz (immeasurably flat from D.C. to 250 kHz) |
Pulse-coherence factor: | Terminated in 10 K Ohms, an 3 meter length of DAL ULC interconnect will reproduce 1 MHz square waves and 1 micro-second wide pulses with an accuracy indistinguishable from the output of the signal generator |
Velocity of Propagation: | Greater than 90%, relative to light in free space |
Physical: | |
Size: | 0.265 inches in diameter |
Color: | Neutral tan |
Lengths: | Standard: 1 meter; 2 meter; 3 meter; 7 meter |
Optional Lengths: | Lengths from .5 meter to 30 meters + |
Terminations: | ULC Standard: RCA ULC Reference: Neutrik RCA ULC Balanced Reference: Neutrik XLR |
- All terminations are heavily gold plated. | |
Inner and Outer Conductors: | Patented multi-strand ultra pure silver plated copper wiring |
Electrical: | |
Impedance: | 6 Ohms, nominal. |
Resistance per foot (D.C.): | Less than 2.5 milli-Ohms |
Total loss for 8ft. length: | Immeasurable over the 20 Hz to 20 kHz range into an 8 Ohm resistive load |
Capacitance per foot: | 340 pico-Farads |
Inductance per foot: | 21.8 nano-Henrys |
Amplitude and Phase response: | Into an 8 Ohm load, an 8 foot length of Z6 cable exhibits a drop of only 0.5 dB and a phase lag of only 30 degrees at 5 MHz (immeasurably flat from D.C. to 250 kHz) |
Pulse-coherence factor: | Terminated in 8 Ohms, an 8 foot length of DAL Z6 cable will reproduce square waves up to 1 MHz with an accuracy indistinguishable from the output of the signal generator |
Physical: | |
Size: | 0.5 inches in diameter |
Color: | Neutral tan |
Lengths: | Standard: 8 foot; 12 foot; 16 foot; 24 foot singles and pairs |
Optional Lengths: | Lengths from 6 inches to 100 feet |
Terminations: | BN4: Banana pin GS4: 1/4 inch spade GGS4: 3/8 inch spade |
- All terminations are heavily gold plated in six inch lengths. Terminations employ unique threaded bolt application system for easy end user installation. | |
Internal Wiring: | Patented multi-strand high purity silver plated copper wiring. (US Patent # - 5,510,578; 4/23/96) |
The DUNTECH PCL25 Loudspeaker has been designed for the discerning listener who demands very accurate sound reproduction from a small package. And at an affordable price. The PCL25 is faithful to the design philosophies that encompass all DUNTECH loudspeakers, and for which Duntech Audio has received international acclaim. The technology is further enhanced by hand-crafted cabinets, which are finished in authentic timber veneer with acoustically transparent black grille cloth. What makes the PCL25 better? The DUNTECH PCL25 Loudspeaker is a two way, three driver design in which the drivers are arranged in a symmetrical fashion along a vertical axis. This creates a simulated point-source radiation pattern. To achieve proper stereo-imaging and depth, loudspeakers must possess point-source radiation patterns when reproducing music recorded by microphones, which are themselves point-source devices. Music as is should be heard The sound from the PCL25 will arrive at your ears simultaneously. It will be low in distortion and sound extremely well-focussed, giving an almost transparent quality. So, the music you hear will create the feeling of "being there", as if your were hearing it played "live". This is the ultimate benefit of DUNTECH pulse coherent technology... excellent stereo-imaging, depth and clarity. And, when you consider the price of the PCL25 and the inclusion of a 5 year warranty, it all adds up to a remarkable loudspeaker package. Time-aligned for greater music accuracy The three drivers in the PCL25 are accurately time-aligned. This means the radiating centres of the drivers are exactly equidistant at the normal listening distance of 3.5 metres. Accurate time-alignment of the drivers is one of a number of design features that Duntech has collectively labelled "pulse-coherent". Pulse coherency determines the ability of a loudspeaker to reproduce complex musical sounds without blurring or smearing. It allows a loudspeaker to faithfully reproduce sound as it is heard naturally by the human ear. |
Electrical | |
Frequency Response Measured at 3.5M (11.5ft) on the tweeter axis | 55Hz-20KHz ±3dB |
Efficiency Referenced at 1M (3.3 ft) on tweeter axis with an input of 2.83 volts RMS (1 watt at 8 ohms) | 89dB SPL |
Nominal Impedance | 4 ohms Variance 3.5-6.5 |
Power Rating Peak power for 10 µS | 500 watts |
Recommended Amplifier Power Minimum RMS per channel | 30 watts |
Pulse Coherency Factor Propagation time error at 3.5M (11.5 ft) on the tweeter axis | Less than 10µS |
Harmonic Distortion Referenced at 1M (3.3 ft) on the tweeter axis with an input of 2.83 volts RMS (1 watt at 8 ohms) | Less than 0.5% THD above 100Hz |
Phase Variation versus Frequency Varies less that ±35 deg | 150Hz to 15Khz |
Crossover | First order type |
Drivers Bass Tweeter | 2x160mm (6.3") 1x25mm (1") |
Input Terminals | Gold plated, accepts bonana, spade or cable connections |
Bi-Wiring | Yes |
Passive Bi-Amplification | Yes |
Footnote: All measurements taken at ambient temperature of 23°C (72°F) | |
Mechanical | |
Finish | Available in Jarrah, Brazilian Rosewood and Black Oak. |
Size Height Width Depth | 606mm (24") 268mm (11") 350mm (14") |
Weight Per cabinet unpacked | 20Kg (44lbs) |
Warranty | Five (5) years, subject to Duntech Audio Warranty Policy |
Stand | Optional |
Electrical | |
Frequency Response Measured at 3.5M (11.5ft) on the tweeter axis | 80Hz-20kHz ą 2dB - 3db down 70Hz |
Efficiency Referenced at 1M (3.3 ft) on tweeter axis with an input of 2.83 volts RMS (1 watt at 8 ohms) | 85dB SPL |
Nominal Impedance | 6 ohms |
Power Rating Peak power for 10 ľS | 200 watts |
Recommended Amplifier Power Minimum RMS per channel | 60 watts |
Pulse Coherency Factor Propagation time error at 3.5M (11.5 ft) on the tweeter axis | Less than 10ľS |
Phase Variation versus Frequency Varies less that ą35 deg | 150Hz to 15kHz Varies less than ą20° |
Crossover | First order type |
Drivers Bass Tweeter | 1x110mm (4.3") 1x10mm (.8") |
Input Terminals | Gold plated, accepts bonana, spade or cable connections |
Bi-Wiring | Yes |
Passive Bi-Amplification | Yes |
Mechanical | |
Finish | Available in Jarrah, Brazilian Rosewood and Black Oak. |
Size Height Width Depth | 275mm (11") 170mm 6.8") 226mm (9") |
Placement | Tripod, shelf or stand - 35mm camera tripod fitting standard Wall mount bracket optional extra |
Warranty | Five (5) years, subject to Duntech Audio Warranty Policy and return of Warranty Registration Form |
Stand | Optional |
Frequency Response | 40Hz - 18KHz ą 3dB |
Efficiency | 86.5dB SPL |
Impedence | 8 ohms Nominal |
Recommended Amplifier Power | 30w RMS |
Power Rating | 150 Watts 500 Watts peak power |
Dimensions | 780mm High, 205mm Wide, 320mm Deep |
Weight | 15kg |
Finish | Australian Jarrah, Brazilian Rosewood, Black woodgrain. Other finishes available on request. |
Frequency Response | 37Hz - 20KHz ą3dB |
Efficiency | 89dB SPL |
Impedence | 4 ohms Nominal |
Recommended Amplifier Power | 30w (Transistor) |
Power Rating | 500 w (Peak power for 10ľs) |
Dimensions | 975mm High, 180mm Wide, 200mm Deep |
Weight | 20kg |
Finish | Jarrah, Brazilian Rosewood, Black Oak. Other finishes available on request. |