Hi all
this is my system based on rPi3 (volumio) > Analog Precision DSP first generation with ES9028 > hypex NC252MP for peerless XLS10 / hypex NC250MP for Satori 16P / NC100HF for Satori BE
The sound is great !!!
Crossover points are like 100-120Hz LR4 betwin XLS and 16P and 2400Hz LR2 betwin 16P and BE.
There is Linkwitz transform on XLS10 and that's all, just a plain LR4 and 2LR.
And a couple pictures of building process.
josip katalinic harm01.jpg
josip katalinic harm02.jpg
josip katalinic harm03.jpg
josip katalinic harm04.jpg
josip katalinic harm05.jpg
josip katalinic harm06.jpg
josip katalinic harm07.jpg
josip katalinic harm08.jpg
Second set
josip katalinic harm09.jpg
josip katalinic harm10.jpg
josip katalinic harm11.jpg
josip katalinic harm12.jpg
josip katalinic harm13.jpg
josip katalinic harm14.jpg
josip katalinic harm15.jpg
josip katalinic harm16.jpg
josip katalinic harm17.jpg
And here is how I setup Linkwitz transform for Peerless XLS 10
LInkwitz XLS 10.jpg
linkwitz to miniDSP.jpg
linkwitz from miniDSP to audiowever.jpg
audiowever graf after save.jpg
Excellent job there Yoke. Nothing like doing it yourself better than the big names can do it.
Thanks Michael ;)
I'm thinking, maybe, to make some 4 way...but...just maybe...will see
Those do sound really, really nice ;)
By the way, I haven't got any notification on email about your replay...
You have to click the notify button at the top right of the thread.
b0 1 1.0046
b1 2 -1.9967
b2 3 0.99215
b1 4 -1.9967
a2 5 - 0.99673
Why is the coefficient b1 entered twice on the matrix?
Hi Spiner
please take a look at this, it mide clear some thing ;)
https://dspconcepts.com/forums/feature-requests-and-bug-reports/198-analog-biquad-filter-and-prewarp-frequency
You have to copy/paste full number from minidsp calculator into audioweaver
once pasted audioweaver ''round'' that number
so it mide look like there is two times b1 but it's a1 in place.
Now, audio weaver does ''calculate'' with 0,454543125454542125454 but it will show 0,45454
If you round that number by your self and anter only 0, + 5 digits you will get false result
so you will have to copy 0,+ all the rest od digits to get right result (just use copy/paste).
hope I explain this right ;)
Greetings Yoke:
I took a second look at the coefficient generator from DSP, they have 15 digits after the decimal point.
a1 and b1 are exactly the same except they have opposite signs at freq.=20Hz , Q= 0.2 and Fs=18.1 Hz.
I used CSVed to import the numbers.
And I have not found what is the proper order, I have used the following list order:
b0=1
b1=2
b2=3
a1=4
a2=5
I tried the biquad in an effort to boost 20Hz-120Hz frequencies and the biquad made no difference.
A scaler module did work at the expense of bad distortion .
The volume module is useless.
My solution to bringing low frequencies to the forefront is to send the low frequencies from the ultimate preamplifer to a second preamplifer (Nikko Beta 1).
May I ask what is it you are trying to achieve with your biquad?
I noticed you are doing it on mid and upper frequencies.
spiner.
Hi Spiner
Those are near field measurements of XLS 10 after I apply those setings
My goal is to boost, apply linkwitz transform, at lower end, I manage to do that.
You did read Davids posta about
"The a1 and a2 coefficients need to be negated"
So the result that you get for those coefficients you need to "reverse" them. If thay are positive you should make them negative (-0.xxxxxxxxxxxxxxxxxx)....
If thay are negative you should make them positive ;)
You could write which model of driver/speaker you are useing and maybe I could run that via software ?
sub na blizu.jpg
Quote from: spiner on July 28, 2021, 03:22:48 AM
I took a second look at the coefficient generator from DSP, they have 15 digits after the decimal point.
a1 and b1 are exactly the same except they have opposite signs at freq.=20Hz , Q= 0.2 and Fs=18.1 Hz.
In my case thay are not the sime
a1 is different then b1
Quote from: spiner on July 28, 2021, 03:22:48 AM
I used CSVed to import the numbers.
And I have not found what is the proper order, I have used the following list order:
b0=1
b1=2
b2=3
a1=4
a2=5
spiner.
I use copy/paste
copy from excel (whole number, all digits) and paste into audioweaver
and negate a1 and a2
b0=1
b1=2
b2=3
a1= -(4)
a2= -(5)
And you have to first negate numbers, then copy and paste !
Audioweaver will show rounded numbers and you can't edit them ''by hand'', if you do so it will mess thing up...I think ;)
you can check results by right click on block, show graph or something like that...
Greetings Yoke:
I'm using Peerless XLS 12" 830500 subwoofer sealed on a cubic foot enclosure with Kenwood L07-M amplifiers.
I did read about David having changed signs,thank you for providing the list order and signs.
spiner