Zee boards have arrivethed !
A present from DHL ;) Partially assembled boards from our prototype assembly service. The rest of the assembly to be done by yours truly :-X
Cheers
David
The Hypex Ncore amplifier modules used in this build consist of:-
1 x NC502MP
2 x NC252MP
2 x HF100
Cheers
David
Nice little package from Mouser arrived !
Cheers
David
Yes lots of assembly required !
The wiring looms require some thought as you don't really want to mix up the high current mains and speaker wiring with the sensitive small signal wiring ;)
David,
Will this Ultimate Amplifier also be offered to the public? The multi-channel class-D amplifier that I have on my prototype bench is strikingly similar, but is only in layout form consisting of ICE modules for woofer and Sure class-D for mids and tweeters.
That was the plan but unfortunately time isn't on our side with the new orders for the preamps. Having said that I use this amp daily and it eventually has to go to the original customer who also ordered a UPP a while ago. Also because there are so many people making these things now and competing on price the urgency wasn't really there. Having said that our amps way a ton due to the stainless steel case and 10mm thick heat spreading plates which is why we can drive then at full power and they don't even break a sweat. Many of the lesser designs try and use a bit of flimsy case work as the heat sink. Not good for long term reliability. I wanted to make ours bullet proof but it has also made them much more expensive to build than other offerings :(
Also this particular amp had some experimental features incorporated into the design which are not seen on any other amp but will be removed to simplify the design in any future revisions. I do have some parts for two more of these amps to put together when I have some more time.
cheers
david