News:

SMF - Just Installed!

Main Menu

Model Information

Started by Tranquility Bass, October 22, 2023, 04:24:41 PM

Previous topic - Next topic

Tranquility Bass

Duntech Marquis

         
       
          The Marquis also has a time aligned, five driver arrangement.
          The bass and mid-range drivers have diecast magnesium chassis. The bass drivers use a vented magnet system and feature a special, coated, pulp paper cone.
          The mid-range drivers are double magnet design and have rubber suspension for low resonance.
          The double chamber tweeter is dome type, with a fabric diaphragm and ferrofluid for efficient cooling and damping.
          The cabinet is designed to provide optimum rigidity and its size has been matched to the performance requirements of the drivers. All drivers have separate sealed enclosures.
          Acoustic felt is matched to the requirements of the loudspeaker and tailored to the geometry of the enclosure.
          The loudspeaker grill is covered with acoustically transparent cloth and the cabinet is hand finished in high quality wood veneers.

       
 
Electrical
Frequency Response
          Measured at 3.5M (11.5ft) on the tweeter axis
45Hz-20KHz
          ±2dB
Efficiency
          Referenced at 1M (3.3 ft) on tweeter axis with an input of 2.83 volts RMS (1 watt at 8 ohms)
92dB SPL
Nominal Impedance
          Variance
4 ohms
          3.0-6.0
Power Rating Peak power for 10 mS500 watts
Recommended Amplifier Power
          Minimum RMS per channel
60 watts
Pulse Coherency Factor
          Propagation time error at 3.5M (11.5 ft) on tweeter axis
Less than
          10µS
Harmonic Distortion
          Referenced at 1M (3.3 ft) on the tweeter axis with an input of 2.83 volts RMS (1 watt at 8 ohms)
Less than
          0.5% THD
          above 70Hz
Relative Phase Variation Versus Frequency
          Varies less that ±25 °
130Hz-15Khz
Crossover
          First order type
Yes
Drivers
          Woofers
          Bass
          Mid
          Tweeter
         
          2x210mm (8")
          2x100mm (4")
          1x25mm (1")
Input Terminals
          Gold plated and accepts banana, spade or cable connections
Yes
Bi-WiringYes
Passive Bi-AmplificationYes
Footnote: All measurements taken at ambient temperature of 23°C (72°F)
Mechanical
Finish
          Brazilian Rosewood
          Golden Oak
          Acoustically transparent black cloth
          Yes
          Yes
          Yes
Size
          Height
          Width
          Depth
          1490mm (59")
          272mm (11")
          469mm (18")
Weight
          Per cabinet
          53Kg
          (117lbs)
Analog-Precision Taking Audio Reproduction to the Next Level.......